The tribological properties of cylinder block/valve plate is an important consideration in the design of axial piston pu......

Thickener formulation plays a significant role in the performance characteristics of grease. The polyurea greases (PUGs)......

Impregnated graphite has attracted considerable attention and has been widely used as an ideal friction material in many......

Using nanoadditives in lubricants is one of the most effective ways to control friction and wear, which is of great sign......

Tribology, which is the study of friction, wear, and lubrication, largely deals with the service performance of structur......

Sodium-ion-exchanged α-zirconium phosphate (Na-α-ZrP) was synthesized by using disodium hydrogen phosphate as the sodi......

This study reports that small amounts of MoO3 multilayer ribbon crystal (MoO3 MLRC) in Ni3Al intermetallics showed the d......

The inclusion complex ofβ-cyclodextrin (β-CD) and sulfurized isobutylene (T321) was prepared with a co-precipitation m......

...

A series of solar radiation tests for the polytetrafluoroethylene(PTFE) bulk and film samples were carried out using Q-S......

Magnesium ion-exchanged a-zirconium phosphates (Mg-a-ZrP) with particle sizes of 600 and 80 nm were prepared through the......

SiC/Cu composites were prepared by hot pressing.The high temperature tribological properties of the composites were inve......

...

The Cu-based electrical contact composites containing reinforcement (Cr2Nb particles) and solid lubricants (NbSe2 partic......

The TiSiC coating was deposited on the surface of Ti6Al4V by multi arc plating technique. The composition, microstructur......

Surface texturing is the process of applying a specific pattern of roughness onto a surface in order to improve its trib......

In order to improve the tribological properties of Ni-based composite coatings, the composite coatings were prepared by ......

Ultra-high molecular weight polyethylene (UHMWPE) loaded with alendronate sodium (ALN) has tremendous potential as an or......

Carbon fabric reinforced phenolic composites were prepared by dip-coating and hot-press techniques, and then their wet t......

Carbon fabric reinforced phenolic composites were prepared by dip-coating and hot-press techniques, and then their surfa......

...

...

Pulse detonation-plasma (PDP) technology is a new kind of surface treatment with a shock-compressed plasma heating/cooli......

In the present study the tribological properties influenced by the microstructure of the Fe-based alloy coatings obtaine......

...

Because of nano-effect,Cu Nano-particles as lubricating material have good tribological properties and repairing propert......

In this paper,ultrasonic cold forging technology (UCFT),Micro-arc oxidation (MAO) process and Micro-arc oxidation (MAO) ......

CrN thick coatings were deposited by using a homemade high-density arc ion plating system under different nitrogen parti......

CrN coatings were deposited on cemented carbide substrates by filtered cathodic vacuum arc technique (FCVA).The effect o......

Engineering polymer materials are widely used in lifting devices in mine factories and other factories rubbing with stee......

为了提升TC4表面摩擦学性能,利用通快4002同轴送粉光纤激光器,在TC4表面制备了TC4 Ni60 Ni-MoS2多元复合自润滑耐磨涂层,并分析研......

The Cr and Ti based boron nitride thin films,including Cr–B–N and Ti-Cr–B–N coatings with various boron contents wer......

The tribological and photocatalytic properties of two kinds of nano-MoS2,namely nano-sphere and nano-platelet,were inves......

为研究电弧重熔对390A合金显微组织、力学性能和摩擦学性能的影响,对采用常规感应熔炼法制备的390A合金锭进行电弧重熔.采用光学显......

The effect of alumina nanoparticle addition on the microstructure and tribological properties of a CuCrW alloy was inves......

合成了一种新型S-N型1，3，4-噻二唑-2-硫酮衍生物（DTSO），用元素分析、红外光谱技术和核磁共振技术对其结构进行了表征；用热重分析仪考察了......